ionic Colloidal Silver Generator

home affiliates Login search checkout contact

Not logged in

» Login

0 Product(s) in cart |

Total $0.00 |

Shopping cart

Telephone

940-488-9776

Order Now $245.00

Three year Parts and labor warranty

All Sota Instruments can be ordered by calling: 1-800-224-0242 Order wholesale by giving this code: CA50007 (Save 10% by giving this coupon code: CA50007)

Toll Free: 1.800.224.0242 Tel: 1.250.770.2023 Fax: 1.250.770.1999 price may vary

The Silver Pulser is a dual function unit 1. Bio-Stimulator Click Here for more information on the Beck Protocol and 2. Ionic/Colloidal Silver Generator with Constant-Current.

The Silver Pulser generates the finest quality Ionic Colloidal Silver at a rate of 5-8 ppm (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The SP5 Silver Pulser (ZBB5) Model has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production. The Silver Pulser has two attachments: one is to make ionic/colloidal silver and the other is for bio-stimulation.

What is "The Silver Pulser"?

New Model SP5 Silver Pulser (ZBB5) features include: See Picture Here

New streamlined unit.

Built-in Constant-Current Circuit for the Ionic/Colloidal Silver Output.

Yellow LED Light indicates when the current through the stimulator electrodes is correct and functioning.

Special DIN style jack to comply with new government regulations.

Soft carrying case

Each Silver Pulser is a professionally designed quality unit, thoroughly tested on an oscilloscope, and is guaranteed to operate per the specifications. (Click HERE to see or the improved schematic. NOTE: Our Silver Pulser has a more advanced and proprietary circuit than what is shown here.)

The Silver Pulser is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.

The Silver Pulser uses only the highest quality .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Electrodes is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Electrode Purity is on file, and can be viewed by clicking HERE.

The Silver Pulser has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 VOLTS DC peak per cycle.

Unique Features:

	The Bio-Electric Protocol has changed. We boosted the output voltage from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.
	A unique circuit design allows The Silver Pulser to operate from a single 9 Volt alkaline battery. Original plans actually called for the use of 7 batteries in the design. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Pulser.
	Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output *regardless* of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
	We use only the purest, Fine Silver rod Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.
	Constant-Current Output - SP5 Silver Pulser (ZBB5) Model has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.
	Output monitoring circuit and indicator.
	The Bio-Stimulator Probes are of the highest quality.
	Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
	All electrical wire connections made with Food Grade solders and fluxes for the highest in safety and purity.
	3 Year Parts and Labour Warranty on all internally mounted components. Replacement Fine Silver Electrodes and Probes are available.

The Silver Pulser is housed in an attractive new custom plastic enclosure with a built-in compartment for the 9 Volt battery. A slide-off lid allows you to change the battery easily. A Thumbwheel Switch Control Knob turns The Silver Pulser on and off and varies the intensity of the "Bio-Stimulator Probe" output.

A Green LED Light comes on when the Silver Pulser is turned on.

A flashing Yellow LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.

An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver electrodes is correct and the circuit is complete.

A Red LED Light indicates low battery.

The Silver Pulser has one 6 pin DIN style jack for plugging in the Fine Silver Electrodes and for the Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries. NOTE: You cannot power the unit with a Wall Adaptor at the same time as using the Bio-Stimulator output. This is a government regulatory stipulation. However, a Wall Adaptor can be used for Silver production only.

We include Cotton Sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)

The Silver Pulser is packaged in a custom soft carrying case for easy storage.

Electronics:

The Silver Pulser is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.

Specifications:

	Battery Voltage: 9 Volts DC (Alkaline Battery)
	Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adapter, Automobile Battery, or Solar Panel.
	Output Voltage at Colloidal Silver Electrodes: 31 Volts DC, (+/- 1 Volt) Constant-Voltage Output
	Output Current at Colloidal Silver rod Wires: 1.5 milliamps (+/- 0.5ma) Constant-Current Output
	Ionic-Colloid Silver Production: 5 - 8ppm (parts per million) for 2 hours for 16 ounces distilled water.
	Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
	Ionic-Colloid Silver Colour: Clear or Pale Gold.
	Silver Electrodes Life: Can make many gallons ionic/colloidal silver per set of Fine Silver Electrodes, when made as directed.
	Output Voltage at Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz. To see the actual output waveform from the oscilloscope, please click HERE. Note the extremely square and symmetrical waveform; free of any spikes or artifacts.
	Output Current at Stimulator Probes: ~12 milliamps maximum when probes shorted and Control Knob on full intensity.

The Fine Silver Electrodes are 14 AWG (1.63mm or 0.064" dia.) x 8" long (20 cm) and are constructed of only Pure Fine (.9999 pure) Silver Wire Electrodes.

Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long).
Weight of The Silver Pulser unit is only a few ounces - very lightweight.

The Silver Pulser SP5 unit includes:

	Operating Instructions
	Two (2) .9999 silver rod (4 Nine Grade) Pure Fine Silver Wire Electrodes
	One (1) Silver Wire Electrodes Holder
	One (1) High Grade Plated Bio-Stimulator Probes
	Two (2) Velcro?/Neoprene? Straps
	One (1) Velcro? Arm Strap
	One (1) Scotchbrite? scrubber pad
	One (1) 2 oz. Dark Glass Dropper Bottle
	Six (6) Cotton Probe Sleeves
	One (1) 9 Volt Alkaline Battery
	One (1) Soft Carrying Case
	CE Certification
	3 Year Parts and Labor Warranty on internally mounted components