|
Order Now
$119.77
Limited Time
Compare the Lite to the SP5
Silver Pulser Here
ORDER
COMPLETE BECK PROTOCOL PACKAGE HERE We are very excited to offer a "lite" version
of our best-seller:
The Silver Pulser
The SP Lite is a dual function unit
1) Bio-Stimulator for use in the Beck Protocol and 2) Ionic/Colloidal Silver Generator with
Constant-Current.
Our new SP Lite is specifically
designed for high reliability and an un-heard-of LOW price. It is simply a
low cost version of the Silver Pulser. At this low price, anyone around the
globe can afford this remarkable technology. Special volume pricing for use
in developing countries.
Now, all of humankind can benefit from
micro-currents of electricity.
What makes the SP Lite different from
the Silver Pulser? Simply put, the
SP Lite cannot be repaired as it is a fully sealed unit. Because of
this, the warranty is only available for 6 months.
After this time, if the SP Lite requires repairs it must be
discarded and a new one purchased. On the
other hand, the Silver Pulser SP5 (Formerly ZBB5) has more refined features, more
accessories and of course has a full 3 year warranty.
If price is a concern and you want to forego
a full warranty and the ability to make repairs to the unit, consider the
SP Lite. If you want a full-featured unit then the Silver Pulser SP5
(Formerly ZBB5) is
the product for you.
New SP Lite Model#: SPL1
features include:
 |
Streamlined unit
|
|
Constant-Voltage output for
Bio-Stimulator
|
|
Constant-Current Circuit for the
Ionic/Colloidal Silver Output
|
|
Flashing Green LED Light indicates when
the current through the stimulator electrodes is correct and functioning
|
|
Orange LED Light indicates when the
current through the Silver Wire Electrodes is correct and functioning
|
|
Special DIN style jack to comply with
new government regulations
|
|
Battery is partially exposed and snaps
into the unit
|
|
Very rugged design: unit is completely
encased in plastic
|
|
No repairs can be made to unit. If unit
fails for any reason, it must be discarded and a new unit purchased
|
|
Minimal accessories, however unit comes
will all necessary cords, electrodes, and parts for full operation.
|
|
6 month warranty |
Each SP Lite is a professionally
designed quality unit, thoroughly tested on an oscilloscope, and is
guaranteed to operate per the specifications.
The SP Lite uses only the
highest quality .9999
Pure Fine Silver Electrodes. Our
Assay Certificate for Silver Electrodes is on file, and can be viewed by
clicking HERE. Our
Certificate of Compliance for
Silver Electrodes Purity is on file, and can be viewed by clicking
HERE.
The SP Lite generates the finest
quality Ionic Colloidal Silver at a rate of 5-8 PPM (part
per million) in 2 Hours for 16 ounces of distilled water, with
an Ionic Colloid silver particle size that is mostly ions, with colloidal
particles in the range of 0.005 - 0.015 microns (Verified on a
Scanning Electron Microscope). The unit has a built-in Constant-Current
Circuit for the ultimate in Ionic/Colloidal Silver Production.
Unique Features:
|
The Bio-Electric
Protocol has changed. We Boosted the output voltage from 27
Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A
new intensity control was specified to help widen the band of the output
control to avoid "bunching" the signal near the high end of the control
knob. |
|
A unique circuit design allows
The SP Lite to operate from a single 9 Volt alkaline battery.
Our state-of-the-art electronic design utilizes a proprietary DC-DC
converter which boosts the output of the 9 Volt battery to
the 31 Volts DC required by The SP Lite. |
|
Constant-Voltage Output - Unique
circuitry maintains the required 31 Volts output regardless
of battery voltage or other input power (like from an AC-DC Wall
Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs
down or if the input voltage fluctuates, the output will maintain
the 31 Volts. No other unit using either 3 x 9 Volt batteries
or voltage triplers can offer this very important feature.
|
|
We use only the purest, Fine Silver rod Wire
Electrodes, 4 Nine Grade (.9999
pure) for the Ionic-Colloid Silver production. |
|
Constant-Current Output - SP
Lite has built-in Constant-Current Circuit for Ionic/Colloidal
Silver production. |
|
Output monitoring circuit and indicator. |
|
The Bio-Stimulator Probes are of the
highest quality copper. |
|
6 Month Limited
Parts and Labor Warranty on all internally mounted components.
Replacement Fine Silver Wire Electrodes and Probes are available.
|
The SP Lite is housed in sealed
custom plastic enclosure with an external slot for the 9 Volt battery. A
Thumbwheel Switch Control Knob turns The SP Lite on and off and
varies the intensity of the "Bio-Stimulator Probe" output.
A Green LED Light comes on when
the SP Lite is turned on.
A Flashing Green LED light
on the unit indicates there is a correct Bio-Stimulator output
and comes on only when current is flowing.
An Orange LED light is used for
the Ionic-Colloidal Silver generation. The Orange LED
Light comes on only when current through Silver Wire Electrodes is correct and
the circuit is complete.
There is no low battery warning light.
The SP Lite has one 6 pin DIN style jack for plugging in the Fine
Silver Wire Electrodes and for the copper Bio-Stimulator Probes. A second
jack is used for hooking up an AC-DC Wall Adaptor so you don't
have to go through batteries. NOTE: You
cannot power the unit with a wall Adaptor at the same time as using the
Bio-Stimulator output. This is a government regulatory stipulation.
However, a wall Adaptor can be used for Silver production only.
We include Cotton Sleeves to put
over the Bio-Stimulator Probes for helping to maintain a good
connection when moistened. (Hint: Use a Salt Water solution or a
conductive gel for better conductivity!)
Electronics:
The SP Lite is designed to the highest
standards. Our electronic design is unique and efficient making the unit
very portable and light-weight. There's even a provision for adding an
external power source to save on batteries when making Ionic/Colloidal
Silver, such as an AC-DC Wall Adaptor which you can purchase from any
electronic store.
Specifications:
|
Battery Voltage: 9 Volts DC
(Alkaline Battery) |
|
Optional Input Voltage: 6 - 12 Volts
DC @500mA Wall Transformer/Adaptor, Automobile Battery, or
Solar Panel. |
|
Output Voltage at Colloidal Silver
Wire Electrodes: 31 Volts DC, (+/- 1 Volt)
Constant-Voltage Output
|
|
Output Current at Colloidal Silver
Wire Electrodes: 1.5 milliamps (+/- 0.5ma)
Constant-Current Output
|
|
Ionic-Colloid Silver Production: 5 -
8ppm (parts per million) for 2 hours for 16 ounces
distilled water. |
|
Ionic-Colloid Silver Particle Size:
Mostly ionic, with colloidal particles in the range of 0.005 - 0.015
microns when made as directed. |
|
Ionic-Colloid Silver Color: Clear or
Pale Gold. |
|
Silver Wire Electrodes Life: Can make many
gallons ionic/colloidal silver per set of Fine Silver Wire Electrodes, when
made as directed. |
|
Output Voltage at Copper Stimulator
Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic
at ~3.92 Hertz (cycles per second) +/- 1 Hz. To see the
actual output waveform from the oscilloscope, please click
HERE. Note the extremely square
and symmetrical waveform; free of any spikes or artifacts.
|
|
Output Current at Copper Stimulator
Probes: ~12 milliamps maximum when probes shorted and Control
Knob on full intensity. |
The Fine Silver Wire Electrodes are 14 AWG (1.63mm
or 0.064" dia.) x 4" long (1.5 mm diameter
x 10 cm long) and are constructed of only Pure Fine (.9999 pure)
Silver Wire Electrodes.
Bio-Stimulator Probes are 1/8"
diameter x 1.25" long (3mm diameter x 3.8 cm long) and are constructed
of heavy copper.
Weight of The SP Lite unit is only a few ounces - very
lightweight.
The SP Lite unit Includes the
following:
|
Operating Instructions
|
|
Two (2)
.9999 silver rod (4 Nine Grade) Pure Fine Silver Wire Electrodes (4
inches long)
NOTE: A Silver Wire Electrodes Holder can
be purchased as an option.
|
|
One (1) Silver rod Wire Alligator Cord
|
|
One (1) High Grade Copper
Bio-Stimulator Probes |
|
One (1) VelcroŽ/NeopreneŽ Strap
|
|
One (1) ScotchbriteŽ scrubber pad
|
|
Four (4) Cotton Probe Sleeves
|
|
One (1) 9 Volt Alkaline Battery
|
|
CE Certification
|
|
6 Months Limited
Parts and Labor Warranty on internally mounted components
|
|
Login Status
